Paxar - Monarch 945

Below are all the different types of Paxar. Select the device of your choice, to download the manual

Contents

USING THE EXTERNAL UNWINDER The Monarch 945 External Unwinder is an optional device used with the Monarch 9855 and 9860 Printers The unwinder is capable of holding a 12 inch roll of supply It unrolls inside or outside wound supplies The unwinder comes assembled These instructions help explain how to set up and use the unwinder Assembling the Winding Axle Flanges 1 Slide the flange with the small setscrew on the axle end that has a setscrew groove Make sure the setscrew seats in the groove and tighten it Small Setscrew QQtcrraiM Crnnuo Large Thumbscrew 2 Slide the roll of supply onto the axle then the flange with the large thumbscrew and tighten it 3 Place the axle assembly into the notches of the unwinder frame AVERY DENNISON ...